TURBO KITS

Suzuki B-King RCC turbo kits now available from POWERHOUSE!!
STAGE ONE AND STAGE TWO!!

Hahn Racecraft Stage One Turbo Kit
External Tial Dual Port Wastegate Mod
Shootout Pipe For Hahn Racecraft Turbos
Powerstack Shootout Turbo Air Filter
Stage II Fuel Rail

RCC Turbos Stage One Hayabusa Turbo Kit
RCC Turbos Stage Two Hayabusa Turbo Kit
RCC Turbos Hayabusa Race Kit
RCC Turbos 500 HP Hayabusa Street/Strip Kit
RCC Turbos Hayabusa Ultra Kit
GSXR1000 RCC Stage One Turbo Kit '01-'04

RCC Turbos Harley Davidson V-Rod Kit
RCC Billet Fuel Rail For Aftermarket Injectors
RCC Stage II Piggyback Plenum Upgrade
Billet Fuel Rail For The Hayabusa

 

 


 




Click for a better view

All needed hardware is included, along with detailed installation/tuning instructions. Ignition retard must be achieved through a Power Commander, available separately.

HAHN RACECRAFT STAGE ONE TURBO SYSTEM

SYSTEM FEATURES: This is a complete TurboSystem, with nothing else to buy!

*Entire system fits within stock bodywork for a very "stealthy" look!
*Exhaust note is mellow and quiet enough to avoid unwanted attention.
*Ultramodern Mitsubishi-Hahn Super 16G turbocharger is the most advanced and durable unit available, well proven during years of brutal, record-setting performances.
*Capable of supporting up to 300 HP of airflow, and even more with bolt-in turbo upgrades!
*Billet aluminum intake plenum installs easily.
*Boost gauge (included) has "peak hold" feature to record boost pressure data for later viewing. Can be mounted in concealed area for further "stealth".
*Ceramic-coated exhaust system includes muffler, can be easily configured for a variety of canister types, even dual exhaust.
*Air piping is powder coated for long lasting beauty.
*Fuel system is easy to install and calibrate; interfaces perfectly with factory EFI system.

POWERHOUSE PRICE: $3895 + S/H

Back To Top

 


 




Click for a better view

Send us your turbine housing and Shootout pipe; we will machine your housing to accept the new gate, do all the fabrication necessary to fit your Tial wastegate and then match the dump pipe to your Shootout exhaust so everything lines up perfect!

EXTERNAL TIAL DUAL PORT WASTEGATE MODIFICATION FOR
HAHN TURBOS

Now you can finally get rid of that internal wastegate
and get control over your turbo bike!

POWERHOUSE can now modify your existing Mitsubishi
turbo by installing a 38mm TIAL dual port wastegate.
With this upgrade you can run whatever low boost you
want and run multiple levels of gear-based boost by
adding an MSBC-1 or AMS-1000 boost controller.

This modification includes a 38mm Tial wastegate with
a racing valve (for leaded fuel), a ceramic coated
dump pipe, and comes standard with an 8 pound spring.
Other springs are available . . .


POWERHOUSE PRICE: $800

Back To Top

 



 


Shown with optional Shootout Filter installed
Click for a better view

All workmanship comes with a 2 year warranty ----ie. cracking pipes or fittings

Turbo unit comes with a 2 year warranty

Fuel pump and FMU come with a 2 year warranty


Click for a better view

Suzuki B-King RCC turbo kits now available from POWERHOUSE!!
STAGE ONE AND STAGE TWO!!


The base Stage One RCC turbo kit for the B-King comes with a 38mm Tial external wastegate, 2 PAIR valve block off plates, crankcase vent filter, an RCC billet fuel rail (.440" bore, 2 AN fittings), a nice boost gauge mount, and a choice of single or double dump pipes. Options include powerstack shootout filter, heavy duty clutch springs, a Tial 50mm blow off valve, and water injection.

The Stage Two RCC turbo kit for the B-King includes everything listed above (except optional items), plus the plenum has 65 lb. piggyback injectors coupled to a 2-bar Microtech fuel computer for 400+ RWHP!!

Click for a better view

RCC Stage One, POWERHOUSE PRICE: $4700.00
RCC Stage Two, POWERHOUSE PRICE: $6700.00

*Dyno chart shown is the Stage One installed on a stock B-King . . .

Back To Top

 


 

 


Click image
for a better view

 

SHOOTOUT PIPE FOR HAHN RACECRAFT TURBOS

Your turbo will spool faster, and you'll make more
horsepower with this pipe.
Looks great too, and
involves minimal fairing modification...



Click images above to see this pipe after installation.

Powerhouse price: $135.00 + Free Shipping!!

Back To Top

 



Click image
for a better view

 


Click image
for a better view

 

POWERSTACK SHOOTOUT TURBO AIR FILTER

The ultimate air filter for your turbo! This filter
is the same one you see on all the shootout bikes...

Measuring 5" tall with a 2 1/2" inlet flange, this
filter will fit Velocity Racing Stage Two turbos and
most of the Hahn Racecraft kits.

Available with 4" inlet for Stage Three and beyond, and now available in a 3" size for the Mr. Turbo customers.


Click images above to see this filter after installation.
CAUTION: File sizes are large so you can see the detail of this filter post-installation
.

Powerhouse price: $49.95 + S/H

Back To Top

 


 



Click for a better view

STAGE II FUEL RAIL

The only thing holding the Stage One Hahn kit from
making more power is the inadequate fuel supplied by
the stock rail and injectors.

With the STAGE II FUEL RAIL, that problem is solved.
The Stage One Hahn kit will make 325-340 RWHP with
this fuel rail setup.

This upgrade comes complete with fuel rail, four
injectors, clips, electrical connectors, AN fittings
for the rail, 5 ft. of high pressure EFI hose with
fittings, and hardware.

Also comes with a recalibration kit for your rising rate fuel regulator

Powerhouse price: $625


Back To Top

 




Click for a better view

This system will make 250 Hp on pump fuel without any engine work. It fits inside stock body work for a very stealthy look. This system can be upgraded to over 400
HP by adding secondary fuel system and with slight
engine work. No more turbo upgrades to be purchased.

All workmanship comes with a 2 year warranty ----ie. cracking pipes or fittings

Turbo unit comes with a 2 year warranty

Fuel pump and FMU come with a 2 year warranty

RCC TURBOS STAGE ONE HAYABUSA TURBO KIT


Custom turbo, built with Garrett internals, will support over 400hp,
38 mm tial gate (external)
304 grade stainless steel header and flanges
Braided oil feed line and fittings
Oil return line and fittings
New in-line fuel pump
Rising rate regulator (FMU)
Fuel lines for the fuel system
Polished aluminum sheet metal air box
Crankcase vent filter
Boost gauge
K&N air filter
All vacuum lines, connectors, hose clamps, and fittings.
Power Commander maps will be supplied with this kit.

Options:
Heavy duty clutch springs - $80 USD
Tial 50 mm BOV - $375 USD
Full pipe and carbon can - $475 USD
Water injection - $840 USD
0.080" Base Spacer - $55 USD
Intecooler Option - $1200 USD

POWERHOUSE PRICE: $4200

Back To Top

 




Click for a better view

This system will make 300 HP on pump fuel with base spacer installed and water injection. It fits inside stock body work for a very stealthy look. This system will make over 400 HP with race fuel and water injection.

All workmanship comes with a 2 year warranty ----ie. cracking pipes or fittings

Turbo unit comes with a 2 year warranty

Fuel pump and regulator come with a 2 year warranty

 

RCC TURBOS STAGE TWO HAYABUSA TURBO KIT


Custom turbo, built with Garrett internals, will support over 400hp
38 mm tial gate (external)
304 grade stainless steel header and flanges
Braided oil feed line and fittings
Oil return line and fittings
New in-line fuel pump
Fuel pressure regulator
Fuel lines for the fuel system
Polished air box with secondary injectors
Secondary fuel controller
Heavy duty clutch springs
Adjustable cam sprocket and cam chain tensioner spacer
0.080" base spacer and head gasket
Crankcase vent filter
Boost gauge
K&N air filter
All vacuum lines, connectors, hose clamps, and fittings.


Options:
Tial 50 mm BOV $375.00
Full pipe and carbon can $475.00 USD
Water injection $840.00 USD
Intecooler Option $1200.00 USD

POWERHOUSE PRICE: $6295

Back To Top

 

 


 



Click for a better view

This system will make 550 HP on race fuel. This system is designed for Prostar street bike shootout series racing.

All workmanship comes with a 2 year Warranty ----ie. cracking pipes or fittings

Turbo unit comes with a 2 year warranty

Fuel pump and regulator come with a 2 year warranty

 

RCC TURBOS HAYABUSA RACE KIT

Garret GT 35-R
44 mm V-band tial wastegate
50 mm tial blow off valve
3" stainless steel race dump pipe
304 grade stainless steel header and flanges
Braided oil feed line and fittings
Oil return line and fittings
Billet fuel rail with AN fittings for stock injectors
Billet fuel rail with AN fitting for secondary injectors
New in-line fuel pump
Fuel pressure regulator
Fuel lines for the fuel system
Polished air box with secondary injectors
2.250" up-pipe with V-Band clamp and o-ring
Secondary fuel controller with internal 40 psi map sensor
Water injection
Oil block off plates
Heavy duty clutch springs
Adjustable cam sprocket and cam chain tensioner spacer
0.080" base spacer, head, clutch and oil pan gaskets
Crankcase vent filter
Fuel pressure gauge installed in primary fuel rail
Fan temperature switch relocater and extension wires
Boost gauge
K&N air filter
All vacuum lines, connectors, hose clamps, and fittings
All hoses, vacuum lines and wires are prelabeled for easy installation
Installation instructions are provided on CD

Options:
Onboard datalogging and wideband O2 - $900 USD
Cooling fan and mounting hardware - $100 USD
This fan will work on your cutdown radiator!!!!!

POWERHOUSE PRICE: $8900

Back To Top

 

 




Click for a better view

This system will make 550 HP on race fuel and is designed for the person who is not planning on building an all out race bike. It is similar to the Race kit, but uses a 2 inch up-pipe that goes through the ram air tube hole. You do not have to cut a frame crossmember for the up-pipe nor do you need to relocate your cooling fan.

All workmanship comes with a 2 year warranty ----ie. cracking pipes or fittings

Turbo unit comes with a 2 year warranty

Fuel pump and regulator come with a 2 year warranty

RCC TURBOS 550HP HAYABUSA STREET/STRIP KIT

550HP Hayabusa Street/Strip kit
Garret GT 35-R
44 mm V-band tial wastegate
50 mm tial blow off valve
3" stainless steel race dump pipe
304 grade stainless steel header and flanges
Braided oil feed line and fittings
Oil return line and fittings
Billet fuel rail with AN fittings for stock injectors
Billet fuel rail with AN fitting for secondary injectors
New in-line fuel pump
Fuel pressure regulator
Fuel lines for the fuel system
Polished air box with secondary injectors
Secondary fuel controller with internal 40 psi map sensor
Water injection
Oil block off plates
Heavy duty clutch springs
Adjustable cam sprocket and cam chain tensioner spacer
0.080" base spacer, head, clutch and oil pan gaskets
Crankcase vent filter
Fuel pressure gauge installed in primary fuel rail
Fan temperature switch relocater and extension wires
Boost gauge
K&N air filter
All vacuum lines, connectors, hose clamps, and fittings
All hoses, vacuum lines and wires are prelabeled for easy installation
Installation instructions are provided on CD

Options:
Onboard datalogging and wideband O2 - $900 USD
Second cooling fan and mounting hardware - $100 USD

POWERHOUSE PRICE: $8900

Back To Top

 




Click for a better view

RCC TURBOS HAYABUSA ULTRA KIT

Garrett GT 35R turbo 44mm V-band Tial Wastegate
50mm Tial Blowoff Valve
3" Stainless Steel Race Dump-pipe
Stainless Steel Header and Flanges
Braided Oil Feed Line with Fittings
Oil Return Line and Fittings
New In-line Fuel Pump
Fuel Pressure Regulator
Fuel Lines
Billet Aluminum Airbox/Intercooler and Secondary Injectors
Heat Exchanger & Electric Waterpump
Fuel Controller with 40psi Internal Map Sensor
Oil Block Off Plates
Heavy Duty Clutch Springs
Adjustable Intake Cam Sprocket
Cam Chain Tensioner Spacer
Head Gasket and Base Spacer
Crancase Vent Filter
Boost Gauge
High Flow Airfilter
Vacuum lines, Hoses, Clamps, & Fittings (Prelabeled)


Click for a better view

This is the ultimate street/strip kit.
The liq/air intercooler on this kit will allow you to safely run up to 380hp on pump fuel, and it will make a very efficient 550hp on race fuel. If you are looking for the ultimate turbo kit, this is it!

POWERHOUSE PRICE: $11,000

Back To Top

 




Click for a better view

This system will make 220 Hp on pump fuel with head gasket installed. It fits inside stock body work for a very stealthy look.

All workmanship comes with a 2 year warranty ----ie. cracking pipes or fittings

Turbo unit comes with a 2 year warranty

Fuel pump and FMU come with a 2 year warranty

2001-2004 GSXR1000 RCC STAGE ONE TURBO KIT

Custom Garret turbo, modded for external wastegate
38 mm tial gate (external)
304 grade stainless steel header and flanges
Braided oil feed line and fittings
Oil return line and fittings
New in-line fuel pump
Rising rate regulator (FMU)
Fuel lines for the fuel system
Polished aluminum sheet metal air box
Crankcase vent filter
Boost gauge
K&N air filter
0.060" thick head gasket

All vacuum lines, connectors, hose clamps, and fittings.
Power Commander maps will be supplied with kits.

Options:
Heavy duty clutch springs - $80.00
Tial 50 mm BOV - $375.00
Water injection - $840.00
Fuel pipe and carbon can - $475.00

POWERHOUSE PRICE: $4350

Back To Top

 

 


 



Click for a better view

All workmanship comes with a 2 year warranty ----ie. cracking pipes or fittings

Turbo unit comes with a 2 year warranty

Fuel pump and FMU come with a 2 year warranty


Click for a better view

RCC TURBOS HARLEY DAVIDSON V-ROD KIT


Custom Garret, T3 flange turbo, modded for external wastegate (turbine housing ceramic coated)
38 mm tial gate (external)
304 grade stainless steel exhaust and flanges (polished)
Braided oil feed line and fittings
Braided oil return line and fittings
New fuel pump for intank
Rising rate regulator (FMU)
Fuel lines for the fuel system
Map sensor adapter and bleed valve
Polished aluminum sheet metal air box
Aluminum pcv filter

All vacuum lines, connectors, hose clamps, and fittings at current only Powercommander map available with kit, race tuner maps available soon

Options:
Heavy duty clutch kit - $180 USD
Tial 50 mm BOV - $375 USD

POWERHOUSE PRICE: $4600

Click for a better view

Back To Top

 

 


 



Click for a better view

RCC BILLET FUEL RAIL FOR AFTERMARKET INJECTORS

Billet Fuel Rail For Aftermarket Injectors allows you to install larger, higher flow injectors on your Suzuki Hayabusa.

It bolts right on, has two AN fittings and a 0.440" bore, and it will flow enough fuel to support well over 600 HP.

POWERHOUSE PRICE: $275

Back To Top

 


 



Click for a better view

STAGE II PIGGYBACK PLENUM UPGRADE

This V-style Stage II plenum comes polished with 95
pound injectors, billet fuel rail, a 50mm Tial
Blow-off valve, and hold-down straps. Also included is
a 4 Bar Microtech Fuel computer, software, and wiring
harness.

These are the very same piggyback injectors and
Microtech box that are used on the RCC Ultra kit -
well capable of fueling any turbo 'Busa over 600 RWHP,
and totally mappable throughout the different boost
levels. This plenum was originally designed to be an
upgrade to the Hahn turbo kits, but has a 2" inlet in
line with the left ram-air frame cutout, and will fit
any turbo kit using that configuration.

This fuel upgrade should be used with a good fuel pump
and a 1:1 fuel regulator, which are not included . . .

POWERHOUSE PRICE: $2865 + S/H

Back To Top

 


BILLET FUEL RAIL FOR THE HAYABUSA


Above: '99 to '07 Busa
Below: 2008 Busa
Click images for a better view

This new billet fuel rail is for your stock injectors, and not only does it give you access to your fuel system, but it increases flow, has -6AN fittings, and will allow you
to run an external fuel pump . . .

POWERHOUSE PRICE: $269.00

 

Back To Top



All products sold by Powerhouse Motorcycles are intended for off-road or racing use only, and as such, no warranty is expressed or implied.

Do it right the first time - at Powerhouse.
...Home of the 750HP Motorcycle Dyno...
111 Jersey Street - West Babylon, NY - 11704
(631)491-6767
powerhouse@fastcycles.com

© 2004 - 2009 - All images and content on this site copyright of Powerhouse Motorcycles, New York. Unauthorized use of these images or content without written permission of Powerhouse Motorcycles, New York is an infringement of copyright law and will result in legal action. All rights reserved as protected by Federal copyright laws.

Back To Top